IDX Multi-functional 100W V-Mount AC Adaptor

The versatile AC-100 is an essential piece of power equipment, providing a 100W AC power supply with V-Mount connection that fits directly to the rear of the camera. It can also be used elsewhere in the studio away from the camera. By connecting a fully charged ENDURA battery to the back of the AC-100 means if AC power is lost, power will automatically be provided by the battery.

The AC-100 can be used in Power Base mode, which allows the operator to connect one ENDURA battery (or two in PowerLink) and use the AC-100 as a power source independent of AC mains supply.
Power Base also provides a battery backup to the camera should the AC mains become disconnected or fail at any stage, so that no critical film is lost or shooting delayed.

The AC-100 has a 14.5V XLR connector to handle the added power required for additional broadcast equipment, a huge benefit for HD production.

• V-Mount connection, providing DC power to the camera.
• Power Base mode enables the AC-100 to provide battery powered DC when the AC mains is not available or becomes disconnected. Enables connection of up two ENDURA batteries (in PowerLink configuration) to generate DC output.
• 1 x 4-pin XLR connector (14.5V regulated). The battery capacity and voltage is output when the AC-100 is used in Power Base mode.
• Compact, lightweight and durable design for use on camera, studio floor and desktop surfaces.
• Universal AC input voltage for worldwide operation.

Input: AC100~240V 50/60Hz
Power Consumption: 130VA/100V 127VA/240V
DC Output Capacity: 100W (14.5V / 6.9A) *The battery capacity and voltage is output when used in Power Base mode
DC Output Voltage: XLR connector: 14.5V regulated *The battery capacity and voltage is output when used in Power Base mode
Protection: Over voltage Over current Temperature protection
Operating Temperature: 0°C ~ 40°C
Operating Humidity Range: 30% ~ 80% RH
Dimensions: 100(W) x 195.5(H) x 71.5(D) mm
Weight: 850g approx.