


|
|




The 3D HERO System allows you to combine two 1080p HD HERO cameras into a single housing to record 3D video and photos while simultaneously recording in 2D. A synchronization cable plugs into the rear HERO Port on both cameras to join them together, enabling both cameras to record video and photos in perfect synchronization. This is a requirement for professional quality 3D and is available only from GoPro.
The included 3D editing software—GoPro Cineform Studio—makes it easy to convert your 3D HERO System footage into viewable 3D files you can watch on your computer, online at sites like YouTube, and on your 2D or 3DTV at home.
Please Be Aware of the Following:
We have been advised of the following comment received from GoPro in regard to sensor alignment in GoPro cameras and the impact this has when using them with the 3D housings.
This was in response to a client measuring the displacements between two GoPro HD Hero cameras with serial numbers from the same batch.
Vertical displacement: 5.56%
Zoom error: 0.05%
Keystone error: 0.21%
Rotational displacement 0.3 degrees
-------------------------------------------------
GoPros Response to the measured displacements:
All cameras will naturally have slight differences in the captured image, and is not any manufacturing fault. There is no way around this. The GoPro cineform studio editing software will automatically calculate the convergence setting to best suit the recorded files. With the software further manual adjustment of the horizontal and vertical convergence is also possible.
-------------------------------------------------
Alignment is by cineform software and as such a loss of resolution of around 40 lines at 720p and 60 lines at 1080P may be experienced based on the above measurements.
GoPro Cameras NOT included
| £50 - £100 based on total value |
|
| £2.50 ex vat |
|
| £2.50 ex vat |
|
| £2.50 ex vat |
|
|
|
|
|
|
|
Copyright 2005-2011 Production Gear Ltd : Company No. 5576712 : VAT Reg. 872534510